Silt and clay both are the result of the chemical as well as a physical breakdown of the minerals which are present in the rock. Both silt and clay are classified as fine-grained soils. Here, In this article, you will get to know the difference between silt and clay. What Is Silt? Silt is a…
What Is Plate Load Test? The Plate Load Test is a field method to identify the ultimate bearing capacity of the soil as well as the possible settlement under such a specified load. In essence, the test consists of taking a rigid plate only at the base level then deciding the settlement relating from each…
Definition of Kelly Clamp Kelly clamp is defined as a vertically movable pinch clamp fastened to a graduated stick to allow the interpretation of the penetration depth of the kelly ball. These are clamped only at top of the device prior to the experiment then dropped to interact with the edge of the tower until the…
What is Compaction of Soil? Compaction of soil is area compacted by mechanical method for remove air voids in compacted soil this area of soil called compaction of soil. Why Use Compaction of Soil? Compaction of soil compacted soil so changes soil property. Soil well compacted and remove air voids in the soil. After done,…
What Is Self Compacting Concrete? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. But the above examples of concrete are normally of lower strength and…
What Is Compaction? compaction of soil is area compacted by the mechanical method to remove air voids in compacted soil this area of soil called compaction. What Is Consolidation? Consolidation is the compaction of soil by the expulsion of water from voids of the soil. Consolidation is a process by which soils decrease in volume….
What Is Self Compact Concrete? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. But the above examples of concrete are normally of lower strength and…