Tests on Stones To determine the required properties of stones, the following tests Could be conducted: Crushing Strength Test Water Absorption Test Abrasion Test Impact Test Acid Test Crushing Strength Test of Stone For conducting this test, a specimen of size 40 × 40 × 40 mm is prepared from parent stone. Afterward, the sides…
What Is Drip Irrigation? Drip irrigation is a type of micro-irrigation system that has the potential to save water and nutrients, allowing water to drip slowly to plant roots, from the ground or below the surface. The goal is to put water directly into the root area and minimize evaporation. Drip irrigation systems distribute water…
What Is Clay Product? There is a wide variety of structural clay products, broadly classified as facing materials, load-bearing materials, paving materials, roofing tile, and chemically resistant materials. Examples of facing materials are face brick, terra-cotta, brick veneer, sculptured brick, glazed brick and tile, and decorative brick. Here, we are going to discuss certain aspects…
Requirements of Good DPC Here, the list of requirements of a good DPC are as follows. Totally impervious and should not allow travel of dampness. Durable and keep the building damp-proof permanently. Economical and easy in laying. Able to resist load to which it is subject. Accommodate some structural movement without fracture. Prevention of Dampness…
What Is Gypsum Plaster? Gypsum plaster is made by heating gypsum at low temperatures to drive off water, to produce plaster of Paris a chalky, fast-setting material commonly used for molds and for casts to repair broken bones. It can be mixed with time to form a fast-drying interior finish plaster known as gauging plaster,…
What Is Passometer? Passometer is an electromechanical and portable instrument, which count the number of paces or velocity of the body movement. It automatically records the number of paces. Its mechanism is being operated by the movement of the body. Passometer is an electromechanical device. Moreover, it is portable, which makes it handy to use…
What Is Pedestal? The term “Pedestal”, so far in the Civil Engineering field is concerned, is a compressive structural member which is provided in between the footing and column, in order to transfer the load uniformly into the footing. In early times, the pedestals were not much in use. It is later found out, when…
Purpose of RCC Concrete The purpose of this procedure is to provide a methodology for active surveillance of various activities involved in the supervision of R.C.C.work at the site and to ensure that (RCC CONCRETE ) Why Need RCC Concrete? Shuttering is placed as per the correct line & level. Reinforcement is laid on as…
What Is Sand Blasting? Commonly called abrasive blasting, grit or sand-blasting can be used to expose the aggregates inside a hardened concrete, giving it a rustic also attractive look, by eroding the surface layer. There are four typical grades of abrasion, with each one producing a matt finish featuring textures varying from these resembling sand-paper…
Why We Measure the Silt Content from the Sand? Silt content is a fine material that’s less than 150 microns. It’s unstable in the presence of water. It’s unstable in the presence of water. If we utilize silty sand for bonding, it will reduce the strength and cause rework. You could be experienced this while…