Difference Between Timber And Wood: What What Is Wood? Wood is a tough and fibrous substance which forms a major portion of the branches and trunk of a tree. In addition, it can be defined as a natural polymeric material which practically does not age. Wood, as a construction material, falls in two major categories…
What Is Mortar? Mortar is a mixture in varying proportions of binding material like cement or lime and an inert material like sand or surkhi (crushed burnt brick) or crushed stone mixed with water. According to requirement, definite quantities of cementing material, sand, or surkhi, and water is added and thoroughly mixed to make a…
Difference Between Heartwood and Sapwood The main difference between the heartwood and the sapwood is that the heartwood is deadwood, interior, while the sapwood is the outermost portion of a wood that is alive. Hardwood vs sapwood In addition, the heartwood occupies a large part of the transversal area of the wood, while the sapwood…
Introduction of Mat Foundation Vs Spread Footing Mat foundation is also called a raft foundation. Generally, it is a continuous slab laying on the soil on which all the columns and beams of the structure are constructed. By the mat foundation, all load of the building or structure is transferred to the soil. Where the…
What Is Plate Load Test? The Plate Load Test is a field method to identify the ultimate bearing capacity of the soil as well as the possible settlement under such a specified load. In essence, the test consists of taking a rigid plate only at the base level then deciding the settlement relating from each…
Introduction of Coarse-Grained Soils Vs Fine-Grained Soils Soil is one of the most important components which should be check and tested before doing any kind of construction on the site. As a civil engineer, it is very necessary that you should know the difference between coarse-grained soils and fine-grained soil so that you can design…
What Is Bitumen? The bitumen is the binding material that is present in asphalt. It also sometimes called mineral tar. It is obtained by partial distillation of crude petroleum. It is chemically a hydro-carbon. It is insoluble in water, but it completely dissolves in carbon disulfide chloroform, alkalies, alkaline, carbonates, petroleum spirit, and oil of…
What Is Carpet Area? Carpet area means it is an accurate area that can freely be covered by a carpeted inner a house and is the area of the house, excluding the thickness of the inner walls. If you had to lay out a wall-to-wall carpet in your entire house, the chosen area covered would…
What Is Veneer? A veneer is a very thin piece of wood that is attached to particleboard or other types of manufactured wood. Veneers are used to lessen the cost of a project without sacrificing the overall appearance. It may be attached using an adhesive, nails, or screws. Veneers are frequently used on cabinets, furniture,…
Mortar Vs. Cement The difference between mortar and cement is that cement is the bonding agent, while the mortar is a product composed of cement, sand, and lime. Both substances have different purposes, as the cement is activated with water and forms a connection with other elements to form a solid object, while the mortar…