Information of Septic Tanks System
A septic tank is basically an underground structure that is made from concrete, plastic, or fiberglass. The main function of the septic tank is to store the domestic sewage for primary treatment. A septic tank is also known as a sewage collection tank which is commonly used in the areas where there is a connection to the main sewerage pipes are available.
One of the common problems with septic tanks is that they will create a nuisance and awful smell of sewage in your entire house which makes unhealthy conditions. This is most likely due to the septic tank get full or damaged due to which wastewater gets out of it and creates an awful smell in the surrounding.
This issue must be fixed as early as possible. Here, in this article, you will get to know all about a septic tank, how much does it cost to pump a septic tank and all about septic tank repair, maintenance, and Septic Pump Replacement Cost.
Why Septic Tanks Required Pumping?
In the septic tank, the sludge gets deposited at the bottom of the tank with time and if it is not pumped regularly then it gets leaked or back up through the pipes. So, it is necessary that the septic tanks should be regularly pumped, clean, and maintain.
The septic tanks are designed for a definite number of persons and with time the number of persons gets increased which ultimately increases the load on the septic tank due to which it gets full and may be leaked. Septic tanks can last for many years but the condition is that they should be well maintained and pumped out regularly.
If the septic tank is not regularly pumped then it will get full and overflow which causes unpleasant conditions and it may clog the drains and the venting systems. The septic tank should be cleaned regularly to avoid the sludge buildup in the septic tank.
Also Read: Septic Tanks Are Back In! Here’s What You Need to Know About How They Work
Typical Problems Leading to Septic Tank Pumping
There are various problems that lead to the septic tank pumping that are as follows
- With time, sludge and scum get concentrated in the septic tank.
- Due to heavy rainfall which increases the water table.
- The drainage pipe gets damaged due to which the water rises too high in the septic tank and pushes the sewage into the drains.
- The pipes inside the fixtures get clogged.
- The level of the sludge and scum is high due to which it leaves the septic tank and enters the drain field.
Septic Tank Cleaning Cost
The cleaning of the septic tank is very important to keep the septic tank in working condition. It is necessary that the septic tank should be cleaned regularly which will reduce the maintenance and the repair cost and also increase the durability of the septic tank.
Here we have given the chart of the septic tank cleaning cost that will give you an idea of the cost required to clean the septic tank of your house.
Size of the Septic tank
Septic Tank Cleaning Cost
|Pumping of the septic tank of volume 750 gallon||$250|
|Pumping of the septic tank of volume 1000 gallon||$375|
|Pumping of the septic tank of volume 1250 gallon||$475|
|Repairing of the septic tank or replacement of the filter
|Repairing of the other parts of the septic tank (optional)||$ 50-400|
The cost of cleaning the septic tank varies from place to place and depends upon the size of your septic tank. You can do an inquiry on Septic Tank Pumping Cost Near You so that you can clean your septic tank.
Septic Tank Repair Cost
The repair of the septic tanks depends upon the defect and how much area of the septic tank should be repaired.
Here are some of the most common damages and repairs are done for the septic tank are as follows.
1. Septic Tank Pump
The average price for the replacement of the septic tank pump ranges from $ 500 to $ 1400. It depends upon the type and the quality of the pump you are using for your septic tank.
2. Septic Tank Baffle
The septic tank baffles are located at the junctions where the pipes enter and exit the septic tank. The baffle which is at the inlet pipe is known as the inlet baffle and the other which is at the outlet pipe is known as the outlet baffle.
The baffles are the important part of the septic tanks that directs wastewater through the septic tank. The average cost of the baffle is around $ 20 to $ 50.
3. Septic Tank Lid
The lid of the septic tank is available in the market of various materials. The concrete lid may get cracked and the steel lid gets rust. The cost of the lid of the septic tank ranges from $ 40 to $ 60.
4. Septic Tank Filter
The septic tank filter is one of the most common replacements that is done for the septic tank and its cost ranges from $ 230 to $ 300.
5. Drain Field
The drain field of the septic tank can get overload and flood due to which there will be a backup of the sewage in the toilets and sinks. The cost required for the replacement of the drain field is $ 3,500 to $ 10,000.
Also Read: Piling for Foundation | Use of Pile Foundation | Characteristics of Pile Foundation
Septic Tank Repair Cost by Type of Repair
The Septic Tank System Cost depends upon the following factors that are as follows.
Type of Repair
|Septic Tank pump||
$ 500 to $ 1400
|Septic Tank Baffle||$ 20 to $ 50|
|Septic Tank lid||$ 40 to $ 60.|
|Septic Tank Filter||
$ 230 to $ 300
$ 3,500 to $ 10,000
How Often Do I Need to Pump My Septic Tank?
The frequency of pumping your septic tank depends upon the size of the septic tank and the number of persons living in your house. It is generally recommended to pump the septic tank every 3-4 years.
It also depends upon the number of persons in your house. If the number of people increases then you have to increase the frequency of pumping a septic tank.
The factors that affect the frequency of the septic tank pumping are as follows.
- Size of the Septic tank
- Total wastewater generated daily
- Number of persons living in a house
- The volume of solids in wastewater
When Do I Need a Septic Tank Inspection?
The septic tank inspection is one of the most common methods during the purchasing or selling of any house. The inspection of the septic tank includes checking pests and inspecting the complete septic structure.
The septic inspections play a vital role in keeping the people living in the house safe and healthy.
Here are some points that will indicate that you need a septic tank inspection
- The water from your toilets and bathrooms as well as sink backing up.
- There is a problem with water pooling in the yard of your house.
- There will be some bad smell coming from the plumbing system of your house.
The inspection and the pumping of the septic tank are very important to ensure the proper working of the septic tank.
It is recommended that you should inspect your septic tank every three years, this will reduce some major costs that are required for repairing the septic tanks.
Type of Septic Tank Inspections
There are two types of septic tank inspections that are generally carried on the septic tank that is as follows
1. Visual Inspection of septic tank
This type of Inspection is usually done when the property or the house is going to sell or buy. The inspector checks the water pressure in the house by running water and flushing all the toilets and water closets of the house.
The visual Inspection is very quick but it does not help you to exactly know the condition of your septic tank, because there are some issues in the septic tank that cannot be seen with the naked eye.
2. Full Inspection of septic tank
This is the complete detailed inspection of the septic tank which is done by the experts and they will submit a detailed report of the issues and the remedies that are required to your septic tank. The experts will also perform a couple of tests to check whether all components are working in good condition or not.
The average Septic System Inspection Cost ranges from $250 to $ 550. The inspection of The Septic Tank Maintenance Cost mainly depends upon the type of maintenance that is required to be done for the septic tank.
How to Keep Safe a Septic System?
The septic tank is one of the most important functional elements of residential structures. The periodic maintenance and repair of the septic tank are necessary to keep the septic tank in efficient working condition.
- Take care while flushing and draining. Avoid flushing of harmful waste such as paint solvents, floor cleaners, and motor oil, etc.
- Avoid the plantation of trees or any other type of plant near your septic tank. Because the roots of the trees can damage the septic system.
- Conserve the water consumption, it will also help you to bill down the water charges and also keep the level of the septic tank in optimum condition.
- Do Periodic maintenance and inspection of the septic tank so that you will fix the issues from time to time.
- Divert Rainwater flow from the septic drain field, will help to avoid the septic tank from overflowing.
- Avoid the use of harmful chemicals as they can pollute the groundwater.
- Dispose of your garbage wisely, because it may clog the drain and affects the working of your septic tank.
Also Read: Grey Water vs Black Water | What Is Grey Water | What Is Black Water
What Cleaning Products Can I Use with a Septic Tank?
The right cleaning product should be selected for the cleaning of the septic tank to maintain the bacterial balance. While selecting the cleaning product, it is important to choose the right one as it will affect your septic tank.
Septic tanks use the bacteria to naturally break down the waste present inside them. If you use wrong or unsuitable products for the cleaning of the septic tank then it can cause various issues such as pollution of the groundwater and clogging of the septic tank.
The septic tanks can handle the low levels of chemicals so it is important that what type of chemicals you are putting inside the septic tank. Here are some of the cleaning products that you can use with a septic tank are as follows
Washing Powder for the Septic Tank
It is recommended to choose the liquid laundry detergent over a powder as sometimes the powder will not break down properly and it can clog the system. Brands such as Bio D, ecozone, and E-cover are eco-friendly detergents that you can use safely for the cleaning of septic tanks.
The multipurpose household cleaners are generally used in septic tanks. But the multipurpose household cleaners should be phosphate-free as these products do not contain any harmful chemicals that will damage the bacteria present in the septic tank.
What Not to Put in a Septic Tank?
There is a large number of disinfectants such as chlorine, pine oil, phenolic that will kill the bacteria in the septic tank. So that these disinfectants should be used in a limited quantity.
Do not use gasoline, paint thinners, grease in your septic tank. These products do not degrade well and they may affect the other processes in the septic tank.
2. Bleach with a Septic Tank
Bleach also kills bacteria but you can use standard household bleach with the septic tank as it is diluted and not strong enough to kill the bacteria present in the septic tank. Also, avoid the usage of extra strong bleach in the septic tank.
How Much Does It Cost to Pump a Septic Tank?
It will cost between $350 and $550 to have your septic tank pumped. The following factors will determine the exact charge: The travel distance to the location from our home base. The amount of digging required, including digging up lids.
How Often to Pump Septic Tank with Leach Field?
For a typical household, septic tanks are usually pumped every three to five years. Routine pumping can prevent expensive failures such as a clogged drainfield or sewage backing up into the home.
How Often to Pump Septic Tank Family of 2
But here are some general guidelines: Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years.
What to Do After Septic Tank Is Pumped?
Use water efficiently, and don’t flush or pour anything down the drain that doesn’t belong. There’s no need to use septic tank additives or do anything special after getting your tank pumped. Just use your household water systems like normal.
Who to Call for Septic Tank Problems?
In many cases, you can call your plumber to help fix the problems, but if you have a septic system, a septic company may be a better choice in some instances. There are significant differences between the tasks a plumber can handle versus those issues that should be dealt with by a septic company.
Septic Tank Problems When It Rains
Heavy rains and flooding can cause major problems with septic systems. If this happens, affected residents not served by central wastewater systems may need to take precautions to prevent possible sewage contamination. Human exposure to wastewater can lead to disease transmission.
Cost to Replace Septic Tank and Drainfield
Replacing a septic tank and drain or leach field can range anywhere from $2,000 for a tiny backyard to $20,000 or more if you have a high-end system and a lot of land. Drain fields are one of the most crucial parts of a septic tank system, and when one goes, your backyard can flood and become pretty stinky.
How Long Does It Take to Replace a Septic Tank?
It takes anywhere from one to eight weeks to replace a septic tank. Installing a new tank only takes around a week. Replacing your whole system will take four to six weeks. Time depends on the type of septic system, extent of damage, and local regulations.
How Much Does It Cost to Replace a Septic Tank Baffle?
Baffles. A septic tank has two baffles, which are components that help control the flow of wastewater. It will cost you anywhere between $300 and $900 to replace it.
How Much Does It Cost to Fix a Cracked Septic Tank?
If it is damaged or not functioning properly, a septic tank must be repaired quickly to avoid a messy and potentially dangerous situation in your backyard. The average septic repair costs $1,775, though the actual cost may range between $650 and $2,950, depending on a variety of factors.
How Often Pump Septic Family of 5?
Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years. Family of 5, 1500-gallon tank – pump every 3.5 years.
How Often Should a Septic Tank Be Pumped in Florida?
The Florida Department of Health recommends that septic tanks be pumped out every four to five years to reduce accumulations of sludge in the tank. Do check your plumbing for leaks on a regular basis.
Who Pays for Septic Inspection When Buying a House?
Under normal home sale agreements, buyers are responsible for the cost of a septic inspection, while the current owner is responsible for the septic pumping/clean out.
Septic Tank Inspection Checklist
Are the risers free of cracks or visible damage? Is the tank free of strong, overpowering odor? Where is the liquid level in the tank? Does the scum layer look like living, healthy soil?
How Long Does a Septic Inspection Take?
How long does it take to perform a septic inspection? Times will vary based on the complexity of each individual system and the field inspector’s on-site findings. Generally an inspection can take anywhere from 45 minutes up to 3 hours.
Septic Inspection Requirements
In general, a septic tank should be inspected every 1 to 3 years and pumped every 3 to 5 years. The frequency of pumping the septic tank depends on the tank size, number of people in the household, habits of water use as well as the amount of solids accumulated in the tank.
Septic Tank Inspection Cost
To that end, the average septic tank inspection cost is about $550. You may pay a price as low as $200 for a basic inspection in a low cost of living area, and as much as $900 for a more in-depth inspection that involves cameras looking for a specific issue.
How to Clean Septic Tank Naturally?
How much baking soda do I put in my septic tank? You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains.
How to Increase Bacteria in Septic Tank Naturally?
Yeast Yeast promotes bacteria and can help bring healthy enzymes to your septic tank. Once a month, flush a 1/4 oz. packet of yeast down the toilet to boost your bacterial activity. Yeast is an awesome natural solution, but don’t use it more than once a month.
What Cleaners Not to Use with a Septic Tank?
Avoid using cleaners that contain toxic bleach, ammonia, phosphates, or petroleum-based chemicals, which can harm your septic. Instead, use proven natural cleaners.
Is Gain Laundry Detergent Safe for Septic Systems?
Gain Liquid Laundry Detergent Original fresh 50oz 2x Concentrate BTL. The Original Fresh scent of Gain you know and lower! Safe for septic tanks. Contains no phosphate.
Is Tide Laundry Detergent Safe for Septic Systems?
Tide Purclean contains plant-based ingredients that won’t harm septic systems. The cleaning agents, solvents, suds reducers, and water softeners are derived from plants. Get Tide laundry detergent on Amazon, at Target, or at Walmart.
Is Washing Soda Safe for Septic Tanks?
Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.
Putting Milk in Septic Tank
Can you put milk in a septic tank? Yes, a small amount of milk or buttermilk can help a septic tank work better. The bacteria in spoiled milk can improve the efficiency of your septic tank when it comes to processing solid organic material.
What Is Safe for Septic Systems?
Vinegar (white vinegar and apple cider vinegar), Borax, OxiClean, and baking soda are some products that can be used to clean very well and be septic-system safe. Oxidized bleaches are also a less hazardous alternative to chlorine bleach.
Putting Dead Animals in Septic Tanks
The theory behind this myth is that adding raw meat or even roadkill to the septic tank will aid in the decomposition of solids. This is false. Rotting meat just adds unnecessary and foreign bacteria to your septic tank. At best, this will do nothing.
What Is the Most Common Cause of Septic System Failure?
Most septic systems malfunction because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.
Like this post? Share it with your friends!
Suggested Read –
- Properties of Stones | Requirements of Good Building Stones
- What Is Falsework | Types of Falsework | Causes of Falsework Failures
- Standard Height of Window from Floor Level | Window Sill Height from Floor
- Alignment of Road | Alignment in Design | Horizontal Alignment of Road | Vertical Alignment of Road
- What Is Azimuths Surveying | What Is Bearings Surveying | Difference Between Azimuths and Bearings in Surveying