Introduction of Spandrel Beam In concrete construction and steel construction spandrel beam is used. Spandrel beams are mainly the load bearing beams which are connected to the circumference of the columns for providing extra support. IN high-rise buildings and masonry walls the dead load of the structure is very high and the weight of slab…
What Is Shell Structure? The structure that retains their size and support load, even without frame or solid mass material inside is called shell structure. A shell is a building that is hollow from within, these shell components are usually bent and formed into a massive frame, they are lightweight constructions using shell elements. A…
Standard Brick Size & Dimensions (Inches & Mm) [su_table responsive=”yes” class=”rk”] Size of the Brick Dimensions in ( Inches ) ( Depth X Height X Length) Dimensions in ( mm ) Modular Brick 3 – 5/8″ x 2 – 1/4″ x 7 – 5/8″ 92 mm x 57 mm x 194 mm Standard Brick 3…
What is Ferrocement? Ferrocement is a substance of wire meshes & cement mortar. It was 1st developed by P.L.Nervi, an Italian architect in 1940. This material has obtained widespread application in construction during the last 20 years. Ferrocement is a versatile sort of composite substance manufactured from OPC (Ordinary Portland Cement) & layers of steel wire…
What Are Washers Used for ? The washer seems to be a thin plate with just a concentration hole which is then used to load a fine fastener equally. For increased safety, a washer may be inserted throughout the end before a wired fitting (such as a screw) is moved into a surface. The bolt…
Material Required for Construction Of WBM Road The term macadam at the present time means road surfaces and bases that form crushed or broken aggregates, cemented together by rolling and water action. WBM road binding action is achieved by the screening of the stone used as a filler in the presence of water. The construction…
What Is Slip Formwork? Formwork is a temporary moulid that is used for the pouring of concrete. The Traditional formwork is made from timber, steel, glass fiber, and some other types of materials. Slip Formwork, also known as slipform shuttering, is a special type of formwork and it is one of the advanced techniques which…
What Is Scaffolding? Scaffolding is a temporary platform used to lift, support, and supply materials during a construction process for the repair or cleaning of a structure. It is installed before construction or maintenance work begins. Therefore, whatever the size of a building, scaffolding will always be necessary. This is done to ensure the safety…
What Is a Monolithic Slab? The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter…
What Is EPDM? EPDM, known for its epdm rubber roofing cost effectiveness, is an extremely durable synthetic rubber roofing membrane widely used in low-slope buildings in the United States and worldwide. Its two primary ingredients, ethylene and propylene, are derived from oil and natural gas. What Is EPDM Roofing? EPDM is a type of roofing…