Introduction of Slab Construction The concrete slab is a horizontal surface of a residential building or commercial building, factory, flat, etc. The thickness of the steel-reinforced slab is near about 100-500mm. These types of slabs are used for ceiling and floor purposes. Less thin slabs are used to construct exterior paving. Sometimes in a domestic…
Introduction of Vitrified Tiles Tiles are one of the most important parts of the interior of the building. Tiles give a smooth and plane surface to the interior of the buildings. Tiles enhance the beauty of the floors in the interior of the structure. There are different types of tiles for the house available in…
Introduction of Shyam Steel Industries Ltd. Shyam Steel Industries Ltd started its journey in 1953 with a small factory in Howrah, West Bengal which is now one of the leading TMT Bar Manufacturers & Supplier in India. Shriram Beriwal, the founder-director of Shyam Steel always dreamt of contributing to the greater good of our society….
Roller Compacted Concrete Roller Compacted Concrete also known as RCC. Roller Compacted Concrete takes its name from the construction method used to build it. It’s placed with conventional or high-density asphalt paving equipment, then compacted with rollers. Roller-compacted concrete has the same basic ingredient as conventional concrete: cement, water, and aggregates, such as gravel or…
What Is Plaster? This is the process of covering rough walls, uneven surfaces in the construction house, and other structures with a plastic material, called plaster or mortar. Sometimes, the term ‘rendering’ is used instead of plastering when the plaster or cement is applied to the external surface of the wall either to improve the…
Aggregates Aggregates are inert granular, substances like either sand gravel or crushed stone which are an important component in concrete, alongside water and portland cement. Aggregates must be pure, hard, solid particles free from ingested chemicals or adhesives of clay as well as other fine materials for a good concrete mix that could trigger the…
What Is Mix Design of Concrete? Concrete mix design involves a process of preparation in which a mix of ingredients creates the required strength and durability for the concrete structure. The ingredients to be tested: are water, fine aggregate (sand), coarse aggregate, cement, chemicals, reinforcement, and soil. Nominal Mix The nominal mix specifies the fixed…
What Is Seasoning of Timber? The wood spice process is the process by which the moisture in the wood is reduced to the required level. By reducing the moisture content, strength, elasticity, and durability properties are developed. A well-seasoned wood contains 15% moisture content. It is a process by which the amount of moisture in…
What Is Unit Weight? The ratio of the weight of a material to its volume is its unit weight, sometimes termed specific weight or weight density. The unit weight of water, γw, is 9.81 kN/m3 in the SI system and 62.4 lb/ft3 in the English system. What Is Density? The term density is used herein…
Joints of Stone Masonry The construction which is done with the help of stones and bonded together with mortar is known as Stone Masonry. Stone Masonry is widely used where the stones are available in abundance. The stone masonry is the type of masonry construction which is done with stones and cement mortar. Stone Masonry…