What Is Dressing of Stone? Dressing of stone is a process of providing a proper shape, size and smooth finish to the rough-surfaced broken stone which is collected from a quarry. This process is done by either hand tools or machinery. Hand tools are used as a pickaxe, chisel etc. The stone dressing process is…
What Is Injection Grouting? Injection Grouting is defined as the process of filling the cracks, and voids under pressure in the structural members for repairing the cracks and strengthening the damaged or deteriorated masonry structures. In the process of grouting, the cracks and the voids are get filled with the help of grouting material which…
What is Bridge? A Bridge, a connecting structure, create bonding between different disconnected parts of a country, two banks of the ocean, or parts of two countries. Also Read: What Is Super Elevation? | Superelevation Definition | Purpose of Providing Superelevation in Roads | Calculation of Superelevation in Roads | Minimum and Maximum Superelevation in Roads…
What Do You Mean by Skeleton Frame? A skeleton frame is a framed structure often used for the construction of multi-story buildings. It incorporates a network, or system, of columns and connecting beams that support the building’s interior floors and exterior walls and carries all loads to the foundations. There are different types of framed…
What Is Plasticizer In Civil? Plasticizers us in concrete for the workability, Strength, and Durability of concrete. Plasticizer in concrete for Water-reducing admixtures usually reduces the required water content for a concrete mixture by about 5 to 12 percent. The use of water-reducing admixtures is defined as Type A in ASTM C 494. The WRA…
Introduction of Beam The Beam is the horizontal structural member which is used to resist the loads which are applied laterally to the axis. Beams are generally used to support on one or more points and the effective length of the beam between two ends supports is known as the span of the beam. In…
What Is Bridge? A bridge is a system for transporting road traffic and perhaps other moving loads across a deep gorge or obstacle, including a river, a canal, a road, or a railroad. Throughout ancient times, the first bridges are built across small streams only with aid of trees down or togs of wood. Subsequently,…
What Is Honeycomb In Concrete? This takes place when the mortar doesn’t fill the distance between the coarse aggregate particles. The presence of honeycomb indicates that the first stage of consolidation hasn’t yet been completed at these locations. Where it shows on the surface, it is necessary to chip out the area and make a…
What Is Dampness? The most common source of dampness is due to the capillary attraction of sub-soil water in the foundation and walls of the building. Water can penetrate the masonry through faulty sills, bad workmanship, etc. and hence in buildings, a layer of water repellent material called damp proof course (DPC) is introduced, which acts as a barrier…
Introduction of Bond Beam Block vs Lintel Block: Bond beam is a horizontal structural element that is generally provided above the brickwork to strengthen the wall. In this article, you will get to know about the Bond beam blocks and lintel blocks. What Is a Bond Beam? The Bond beam blocks are the horizontal concrete masonry units. The bond…