What Is Weirs? Weir is characterised as a barrier through which water flows into an open channel. The edge or surface on which the water runs is called the crest. The overflowing water layer is the water table. If the nappe is discharged into the air, the weir gets a free discharge. If the discharge…
Bearing Capacity Definitions Bearing capacity: It is the loading capacity of the soil. Ultimate bearing capacity (qu): That is the least gross pressure that will result in the shear collapse of the supporting soil directly below the foundation. Net ultimate bearing power (qun): it is the net strain that can be added to the foundation…
What Is Tunel? Tunnels are artificial underwater tunnels that are built without damaging the surface of the earth. The tunnels are underwater passageways used mostly for transport purposes. They may be used to transport freight and travellers, water, sanitation, respectively. Tunnels are often more efficient than open cuts over a certain depth. Tunnels prevent disruption…
What Is Vacuum Concrete? Vacuum concrete is that type of concrete where the extra water is removed for increasing the strength of concrete. A small part of concreting part is constructing by vacuum concrete of slab and walls; then, we need to maintain the water-cement ratio 0.5-0.65. If we remove the excess water and air…
Introduction of Structural Loads Structural analysis is a salient feature of a design of buildings as structural loads can typically cause stress, deformation, and displacement which might result in structural failure. What Are Structural Loads? Loads are generally the forces that can cause stresses, deformations, or accelerations. There are an ample range of distinct kinds…
Introduction of PRE Engg Building The Steel industry is growing rapidly all over the world. Steel is widely used Building material in the construction industry. Nowadays steel structures getting more popularity because of its economy and faster construction. The owner of the example of steel structure is PEB building. In this article, you will get…
What Is Flyover? A Flyover is a bridge that carries one railroad or road over another. Flyover can also be described as an overpass or a high road bridge that crosses a highway or intersection. The difference between the Bridge and Flyover is depending on the purpose of its use and the location where it…
Kani’s Method Structural analysis is one of the most important parts of civil engineering. The construction of high rise buildings and multi-storey buildings are increasing day by day. The high rise building requires the perfect analysis of frames and different structure of members features has a number of joints. Kani’s method was developed by Gasper…
We know that Rebar. It is known as reinforcement steel and reinforcing steel. This is a steel bar or mesh bar of steel wire used in reinforced concrete and masonry structures to strengthen and hold this concrete in tension. Reinforcing steel bars are used to help the concrete withstand tension forces. Why use Rinforcmnet in…
What Is the Slab? A slab is an important structural feature that provides flat surfaces in buildings. Slabs are commonly categorised as one-way or two-way based on the reinforcement offered, beam support, and span ratio. The former is endorsed on both ends, and the long-to-short time ratio is greater than two. The above, on the other…