What Is ACP Sheet? The ACP is a short form of Aluminum composite panel, it is also known as the sandwich panel. The aluminum composite panel is a joint invention of the 3A composites company with BASF in 1964. The aluminum composite panel is a composite material in which the fire-retardant core and thermoplastic polythene…
What Is Weep Holes? A weep hole, also known as a weep brick, is a small opening that allows water to drain from a structure. The weeps are placed on the bottom of the object to enable drainage; these holes must be large enough to overcome surface pressure. The weeps could also be needed for…
Types of Tests on Bricks For construction works to determine the suitability of bricks the following test is conducted- Absorption test. Crushing strength test. Hardness test. Shape and size. Colour test. Soundness test. Structure of bricks. Efflorescence test of bricks. Also Read: What Is Bituminous Road? | Bituminous Road Construction | Bituminous Road Layers | Bituminous…
What Is Grade on Slab? Grade on the slab is a special type of slab which is constructed on the earth soil. This type of slab is constructed to support the walls and other structural elements. The construction of grade on slab is the place of ground level. In grade on the slab, it does…
Steel Is Stronger Than Concrete? Because concrete has greater compressive strength than steel, steel bars are utilized in concrete to accommodate tension stresses due to the concrete’s weakness. The concrete wall alone is far more powerful than the steel mass. Concrete buildings have significant safety advantages over steel structures. Concrete provides great explosion protection and…
Introduction of Spandrel Beam In concrete construction and steel construction spandrel beam is used. Spandrel beams are mainly the load bearing beams which are connected to the circumference of the columns for providing extra support. IN high-rise buildings and masonry walls the dead load of the structure is very high and the weight of slab…
What Is Shell Structure? The structure that retains their size and support load, even without frame or solid mass material inside is called shell structure. A shell is a building that is hollow from within, these shell components are usually bent and formed into a massive frame, they are lightweight constructions using shell elements. A…
Standard Brick Size & Dimensions (Inches & Mm) [su_table responsive=”yes” class=”rk”] Size of the Brick Dimensions in ( Inches ) ( Depth X Height X Length) Dimensions in ( mm ) Modular Brick 3 – 5/8″ x 2 – 1/4″ x 7 – 5/8″ 92 mm x 57 mm x 194 mm Standard Brick 3…
What is Ferrocement? Ferrocement is a substance of wire meshes & cement mortar. It was 1st developed by P.L.Nervi, an Italian architect in 1940. This material has obtained widespread application in construction during the last 20 years. Ferrocement is a versatile sort of composite substance manufactured from OPC (Ordinary Portland Cement) & layers of steel wire…
What Are Washers Used for ? The washer seems to be a thin plate with just a concentration hole which is then used to load a fine fastener equally. For increased safety, a washer may be inserted throughout the end before a wired fitting (such as a screw) is moved into a surface. The bolt…